KERALA PSC PREVIOUS QUESTION PAPER - CLERK TYPIST-TYPIST-LOWER DIVISION TYPIST-STENOGRAPHER-MODEL QUESTION PAPER-2019-2020

KERALA PSC PREVIOUS QUESTION PAPER - CLERK TYPIST-
TYPIST-LOWER DIVISION TYPIST-
STENOGRAPHER-MODEL QUESTION PAPER-2019-2020

KERALA PSC PREVIOUS QUESTION PAPER - CLERK TYPIST-TYPIST-LOWER DIVISION TYPIST-STENOGRAPHER-MODEL QUESTION PAPER-2019-2020

Question51:-By using ___________ the cylinder can be rotated.

 A:-Feed rollers

 B:-Platen knobs

 C:-Ratchet wheel

 D:-Escapement wheel

 Correct Answer:- Option-B

Question52:-Fulcrum wire is also known as __________.

 A:-Detent release

 B:-Detent roller

 C:-Segment wire

 D:-Detent wire

 Correct Answer:- Option-C

Question53:-The papers which is suitable for taking carbon copies are

 A:-Manifold papers

 B:-A4 size papers

 C:-Stencil papers

 D:-None of the above

 Correct Answer:- Option-A

Question54:-____________ is used to type the letter ' i ' in a type writer.

 A:-Right small finger

 B:-Right ring finger

 C:-Right middle finger

 D:-Right index finger

 Correct Answer:- Option-C

Question55:-With the help of __________, we can type letters at the end of the paper.

 A:-Feed roll release lever

 B:-Paper release lever

 C:-Margin release lever

 D:-Overhead paper bail rods

 Correct Answer:- Option-D

Question56:-To type mathematical formulae and chemical equations ___________ is used.

 A:-Detent release

 B:-Margin release

 C:-Variable line spacer

 D:-None of the above

 Correct Answer:- Option-C

Question57:-How many space should be left before a comma (,) in a type writer?

 A:-No space

 B:-Half space

 C:-Single space

 D:-Double space

 Correct Answer:- Option-A

Question58:-Carriage rack rests on the top of ____________.

 A:-Cylinder

 B:-Main spring

 C:-Escapement wheel

 D:-Pinion wheel

 Correct Answer:- Option-D

Question59:-The force of the main spring is transmitted to the carriage by means of the __________.

 A:-Carriage return

 B:-Carriage rails

 C:-Ratchet wheel

 D:-Draw cord

 Correct Answer:- Option-D

Question60:-To adjust the paper to the same line of typing for reinsertion work, __________ is used.

 A:-Card holders

 B:-Line finder

 C:-Line space

 D:-Line space adjusting lever

 Correct Answer:- Option-B

Question61:-Locking action in type writer avoids ___________ of letters.

 A:-Piling

 B:-Indenting

 C:-Jerking

 D:-Grafting

 Correct Answer:- Option-A

Question62:-The movement of ribbon automatically from full spool to empty spool is known as

 A:-Up and down movement

 B:-Lengthwise movement

 C:-Automatic reverse movement

 D:-Sluggish movement

 Correct Answer:- Option-C

Question63:-___________ letters can be typed in Elite typehead.

 A:-6

 B:-8

 C:-10

 D:-12

 Correct Answer:- Option-D

Question64:-Confidential or urgent matters are forwarded as

 A:-Official letter

 B:-Demi-official letter

 C:-Business letter

 D:-Notifications

 Correct Answer:- Option-B

Question65:-In Proceedings, 'To address' is given in the

 A:-Left top

 B:-Right top

 C:-Left bottom

 D:-Right bottom

 Correct Answer:- Option-C

Question66:-In Govt. Order, below the abstract, the abstract content usually leave ___________ space between two lines.

 A:-Single line

 B:-One and half line

 C:-Double line

 D:-Three line

 Correct Answer:- Option-A

Question67:-For typing the display matter, ____________ line space should be used.

 A:-Single

 B:-Double

 C:-Three

 D:-No such criteria

 Correct Answer:- Option-D

Question68:-In an official letter, 'stet' denotes

 A:-Insert correction

 B:-Ignore correction

 C:-Do not type

 D:-Type in next paragraph

 Correct Answer:- Option-B

Question69:-Line lock mechanism is not released with ___________.

 A:-Margin rack

 B:-Line lock plate

 C:-Margin stop

 D:-Pinion wheel

 Correct Answer:- Option-D

Question70:-Type guide is also known as ____________.

 A:-Common centre

 B:-Segment guide

 C:-Printing point

 D:-All of the above

 Correct Answer:- Option-D

Question71:-If the dust clogged into the typefaces, can be removed by __________.

 A:-Hat pin

 B:-Chamois leather

 C:-Oil

 D:-None of the above

 Correct Answer:- Option-A

Question72:-The ____________ should be kept in 'off' position while rotating drum for spreading ink.

 A:-Impression roller

 B:-Operating lever

 C:-Silk carrier

 D:-Margin adjusting knobs

 Correct Answer:- Option-B

Question73:-How many bevel gears are there in the long gear shaft?

 A:-1

 B:-2

 C:-3

 D:-4

 Correct Answer:- Option-B

Question74:-Rotcher mechanism contains the working of

 A:-Escapement wheel and pinion wheel

 B:-Loose dog and rigid dog

 C:-Both of the above

 D:-None of the above

 Correct Answer:- Option-C

Question75:-The capital letter 'D' stands for

 A:-50

 B:-100

 C:-500

 D:-1000

 Correct Answer:- Option-C

Question76:-If any part of the matter is not needed in stencil, ___________ can be used.

 A:-Gum paper

 B:-Stylus pen

 C:-Impression roller

 D:-Duplicating paper

 Correct Answer:- Option-A

Question77:-For typing the symbol " & " (and) in a type writer, press shift key and ___________.

 A:-6

 B:-7

 C:-8

 D:-9

 Correct Answer:- Option-B

Question78:-This helps to take paper without rotating cylinder

 A:-Feed rolls release lever

 B:-Paper bail

 C:-Tabulator release lever

 D:-Segment

 Correct Answer:- Option-A

Question79:-Carriage moves towards left by

 A:-Touching space bar

 B:-Pressing character keys

 C:-Pressing tabulator key

 D:-All of the above

 Correct Answer:- Option-D

Question80:-The part, controls the pressure of key lever, situated at the bottom of type writer

 A:-Touch regulator

 B:-Dog block

 C:-Marginal release lever

 D:-Line space adjuster

 Correct Answer:- Option-A

Question81:-The space left between the margin and the start of a paragraph is called

 A:-Spacing

 B:-Gutter

 C:-Indentation

 D:-Alignment

 Correct Answer:- Option-C

Question82:-A number of letters that appears little below the normal text is called

 A:-Superscript

 B:-Subscript

 C:-Super text

 D:-Top text

 Correct Answer:- Option-B

Question83:-Which item appears dimly behind the main body text?

 A:-Watermark

 B:-Background

 C:-References

 D:-Back Color

 Correct Answer:- Option-A

Question84:-Margin that is added to the binding side of page when printing is called ___________.

 A:-Top Margin

 B:-Mirror Margin

 C:-Moderate Margin

 D:-Gutter Margin

 Correct Answer:- Option-D

Question85:-By pressing F12, which of the following will happen?

 A:-Save As dialog box will open

 B:-Open dialog box will open

 C:-Save dialog box will open

 D:-Close dialog box will open

 Correct Answer:- Option-A

Question86:-Which of the following is not the merge process?

 A:-Edit a data source

 B:-Sort the data source records

 C:-Merge the two files to print or create a new document

 D:-Format a main document

 Correct Answer:- Option-B

Question87:-Regular, Italics, Bold, Bold Italic etc. are known as ___________.

 A:-Font effects

 B:-Font size

 C:-Font styles

 D:-Font scripts

 Correct Answer:- Option-C

Question88:-By using Ctrl + P, which of the following will happen?

 A:-Open Paragraph Dialog Box

 B:-Open Save Dialog Box

 C:-Open Page Format Dialog Box

 D:-Open Print Dialog Box

 Correct Answer:- Option-D

Question89:-Which key deletes the characters to the left of the cursor?

 A:-Home

 B:-Back space

 C:-Space

 D:-Delete

 Correct Answer:- Option-B

Question90:-Which of the following is true regarding page orientation of a document?

 A:-Page orientation can be changed at any time

 B:-Page orientation of a document cannot be changed

 C:-Page orientation must be set before start typing

 D:-Page orientation of a document determines by printer

 Correct Answer:- Option-A

Question91:-What will appear on the screen, if press Shift + 7 Short key?

 A:-@

 B:-%

 C:-&

 D:-!

 Correct Answer:- Option-C

Question92:-Draw a line throw the middle of the selected text is known as __________.

 A:-Strikethrough

 B:-Change case

 C:-Subscript

 D:-None of these

 Correct Answer:- Option-A

Question93:-The Key used to move the cursor by a fixed number of spaces is the ___________.

 A:-Backspace key

 B:-Tab key

 C:-Alt key

 D:-Shift key

 Correct Answer:- Option-B

Question94:-Which of the following short key is used for deleting the selected item permanently without placing the item in

the Recycle Bin?

 A:-Alt + Delete

 B:-Ctrl + Delete

 C:-Shift + Delete

 D:-None of these

 Correct Answer:- Option-C

Question95:-The ability to combine name and addresses with a standard document is called __________.

 A:-Paragraph formatting

 B:-Form letters

 C:-Drop cap

 D:-Mail merge

 Correct Answer:- Option-D

Question96:-Which is the following is used as Word Processor in Linux Operating System?

 A:-Base

 B:-Writer

 C:-Calc

 D:-Impress

 Correct Answer:- Option-B

Question97:-Which can be used for quick access to commonly used commands and tools?

 A:-Menu Bar

 B:-Title Bar

 C:-Tool Bar

 D:-Status Bar

 Correct Answer:- Option-C

Question98:-Ctrl + N is used to

 A:-Save document

 B:-Open document

 C:-Close document

 D:- New document

 Correct Answer:- Option-D

Question99:-In which of the following option is used for inserting decorative text in a document?

 A:-Clip Art

 B:-Text Box

 C:-Word Art

 D:-Book mark

 Correct Answer:- Option-C

Question100:-Create a large capital letter at the beginning of a paragraph is named as __________.

 A:-Drop Cap

 B:-Word Count

 C:-Bookmark

 D:-Smart art

 Correct Answer:- Option-A